Recommended
centrifuge- Centrifuge for 10 minutes at 3500-40O0RPM
Intended use
K3EDTA tubes are used to collect. transport and process blood for testing plasma or whole
blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can
prevent the blood coagulation, does not affect the count and size of the leukocyte and keep
erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K3 EDTA as
anticoagulant.
Recommended
centrifuge- Centrifuge for 10 minutes at 3500-40O0RPM
Intended use
K3EDTA tubes are used to collect. transport and process blood for testing plasma or whole
blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can
prevent the blood coagulation, does not affect the count and size of the leukocyte and keep
erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K3 EDTA as
anticoagulant.
K3 EDTA
Specification
Specimen- Whole blood
Additive- 14 unit/ml
Cap
color- Lavender
Tube
size- 13 X 40 mm
Draw
volume-0.5ml ,1.0ml
Inversion- Invert the tube 5-8 times gently
Recommended
centrifuge- Centrifuge for 10 minutes at 3500-40O0RPM
Intended use
K3EDTA tubes are used to collect. transport and process blood for testing plasma or whole
blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can
prevent the blood coagulation, does not affect the count and size of the leukocyte and keep
erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K3 EDTA as
anticoagulant.
Recommended
centrifuge- 30minute after collection Centrifuge for 10 minute at
3500-4000RPM
Intended use
Clot Activator Tubes are used to collect, transport and process blood for testing serum
in the clinical laboratory.
Principle
Clot Activator Tube is coated with micronised silica particles which
cause blood to clot rapidly. It can provide enough nonpolluted serum specimen for clinical
test.
Design
It is composed of plastic and or glass tube containing Separating gel
and spray-dried microscopic silica particles.
Clot Activator
Specification
Specimen- Serum
Additive- 8 unit/ml
Cap
color- Red
Tube
size- 13 X 75 mm
Draw
volume- 2.0ml, 3.0ml, 4.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- 30minute after collection Centrifuge for 10 minute at
3500-4000RPM
Intended use
Clot Activator Tubes are used to collect, transport and process blood for testing serum
in the clinical laboratory.
Principle
Clot Activator Tube is coated with micronised silica particles which
cause blood to clot rapidly. It can provide enough nonpolluted serum specimen for clinical
test.
Design
It is composed of plastic and or glass tube containing Separating gel
and spray-dried microscopic silica particles.
Clot Activator
Specification
Specimen- Serum
Additive- 8 unit/ml
Cap
color- Red
Tube
size- 13 X 40 mm
Draw
volume-0.5ml ,1.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- 30minute after collection Centrifuge for 10 minute at
3500-4000RPM
Intended use
Clot Activator Tubes are used to collect, transport and process blood for testing serum
in the clinical laboratory.
Principle
Clot Activator Tube is coated with micronised silica particles which
cause blood to clot rapidly. It can provide enough nonpolluted serum specimen for clinical
test.
Design
It is composed of plastic and or glass tube containing Separating gel
and spray-dried microscopic silica particles.
Recommended
centrifuge-Centrifuge for 10 minutes at 3500-40O0RPM
Intended use
K2EDTA tubes are used to collect, transport and process blood for testing plasma or whole
blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can
prevent the blood coagulation, does not affect the count and size of the leukocyte and keep
erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K2 EDTA
potassium salt as anticoagulant.
K2 EDTA
Specification
Specimen- Whole blood
Additive- 14 unit/ml
Cap
color- Lavender
Tube
size- 13 X 75 mm
Draw
volume-2.0mI, 3.0ml, 4.0ml
Inversion-Invert the tube 6-8 times gently
Recommended
centrifuge-Centrifuge for 10 minutes at 3500-40O0RPM
Intended use
K2EDTA tubes are used to collect, transport and process blood for testing plasma or whole
blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can
prevent the blood coagulation, does not affect the count and size of the leukocyte and keep
erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K2 EDTA
potassium salt as anticoagulant.
Sodium Citrate 3.2
Specification
Specimen-Piasma or whole
Additive- 100 unit/ml
Cap
color- Blue
Tube
size- 13 x 75mm
Draw
volume- 2.0ml, 3.0ml
Inversion-4—6 Time inverted gently
Recommended
centrifuge- Centrifuge for 10 minutes at 4000 RPM
Intended use
Sodium Citrate 3.2 % tubes are used to collect, transport and process blood for testing
plasma or whole blood in the clinical laboratory.
Principle
Coagulation tubes are filled with buffered tri — sodium citrate. The
mixing ratio is 1 part citrate to 9 parts blood with advantages of high accurate blood
— to — additive ratio. It can provide an excellent condition for the blood coagulation
studies.
Design
It is composed of plastic tube containing Sodium Citrate as
anticoagulant.
Sodium Citrate 3.2
Specification
Specimen-Piasma or whole
Additive- 100 unit/ml
Cap
color- Blue
Tube
size- 13 x 75mm
Draw
volume- 2.0ml, 3.0ml
Inversion-4—6 Time inverted gently
Recommended
centrifuge- Centrifuge for 10 minutes at 4000 RPM
Intended use
Sodium Citrate 3.2 % tubes are used to collect, transport and process blood for testing
plasma or whole blood in the clinical laboratory.
Principle
Coagulation tubes are filled with buffered tri — sodium citrate. The
mixing ratio is 1 part citrate to 9 parts blood with advantages of high accurate blood
— to — additive ratio. It can provide an excellent condition for the blood coagulation
studies.
Design
It is composed of plastic tube containing Sodium Citrate as
anticoagulant.
Sodium Citrate 3.2
Specification
Specimen-Piasma or whole
Additive- 100 unit/ml
Cap
color- Blue
Tube
size- 13 X 40 mm
Draw
volume-0.5ml ,1.0ml
Inversion-4—6 Time inverted gently
Recommended
centrifuge- Centrifuge for 10 minutes at 4000 RPM
Intended use
Sodium Citrate 3.2 % tubes are used to collect, transport and process blood for testing
plasma or whole blood in the clinical laboratory.
Principle
Coagulation tubes are filled with buffered tri — sodium citrate. The
mixing ratio is 1 part citrate to 9 parts blood with advantages of high accurate blood
— to — additive ratio. It can provide an excellent condition for the blood coagulation
studies.
Design
It is composed of plastic tube containing Sodium Citrate as
anticoagulant.
Recommended
centrifuge- 30 Minutes after collection Centrifuge for 10 minutes at
3500-4O0ORPM
Intended use
Gel + Clot Activator Tubes are used to collect, transport and process blood for testing
serum in the clinical laboratory.
Principle
Clot Activator Tube is coated with micronised silica particles which
cause blood to clot rapidly and the barrier gel can effectively separate the serum from
fibrin and cells, while preventing substance exchange between blood cell and serum.
Design
It is composed of plastic and or glass tube containing Separating gel
and spray-dried microscopic silica particles.
Gel-Clot Activator
Specification
Specimen- Serum
Additive- 8 unit/ml & Gel 520 unit/mg
Cap
color- Yellow
Tube
size- 13 X 75 mm
Draw
volume-2.0ml, 3.0ml, 4.0ml
Inversion- 4-6 Time inverted gently
Recommended
centrifuge- 30 Minutes after collection Centrifuge for 10 minutes at
3500-4O0ORPM
Intended use
Gel + Clot Activator Tubes are used to collect, transport and process blood for testing
serum in the clinical laboratory.
Principle
Clot Activator Tube is coated with micronised silica particles which
cause blood to clot rapidly and the barrier gel can effectively separate the serum from
fibrin and cells, while preventing substance exchange between blood cell and serum.
Design
It is composed of plastic and or glass tube containing Separating gel
and spray-dried microscopic silica particles.
Gel Lithium Heparin
Specification
Specimen-Plasma
Additive- 10 unit/ml
Cap
color- Green
Tube
size- 13 X 75 mm
Draw
volume- 2.0ml, 3.0ml, 4.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- Centrifuge for 10 minute at 3500-4000RPM
Intended use
Lithium Heparin tubes are used to collect, transport and process blood for testing plasma
or whole blood in the clinical laboratory.
Principle
The anticoagulant heparin activities antithrombins, thus blocking the
coagulation cascade and produce plasma.
Design
It is composed of plastic tube containing Lithium Heparin as
anticoagulant.
Recommended
centrifuge- Centrifuge for 10 minute at 3500-4000RPM
Intended use
Lithium Heparin tubes are used to collect, transport and process blood for testing plasma
or whole blood in the clinical laboratory.
Principle
The anticoagulant heparin activities antithrombins, thus blocking the
coagulation cascade and produce plasma.
Design
It is composed of plastic tube containing Lithium Heparin as
anticoagulant.
Lithium Heparin
Specification
Specimen- Plasma
Additive- 10 unit/ml
Cap
color- Green
Tube
size- 13 X 75 mm
Draw
volume-2.0ml, 3.0ml, 4.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- Centrifuge for 10 minute at 3500-4000RPM
Intended use
Lithium Heparin tubes are used to collect, transport and process blood for testing plasma
or whole blood in the clinical laboratory.
Principle
The anticoagulant heparin activities antithrombins, thus blocking the
coagulation cascade and produce plasma.
Design
It is composed of plastic tube containing Lithium Heparin as
anticoagulant.
Lithium Heparin
Specification
Specimen- Plasma
Additive- 10 unit/ml
Cap
color- Green
Tube
size- 13 X 40 mm
Draw
volume-0.5ml ,1.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- Centrifuge for 10 minute at 3500-4000RPM
Intended use
Lithium Heparin tubes are used to collect, transport and process blood for testing plasma
or whole blood in the clinical laboratory.
Principle
The anticoagulant heparin activities antithrombins, thus blocking the
coagulation cascade and produce plasma.
Design
It is composed of plastic tube containing Lithium Heparin as
anticoagulant.
Sodium Fluoride
Specification
Specimen- Plasma
Additive- 20 unit/ml
Cap
color- Gray
Tube
size- 13 X 75 mm, 13 X 100 mm, 16 X 100 mm
Draw
volume- 0.5ml, 1.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- Centrifuge for 10 minute at 3500-4000RPM
Intended use
Sodium Fluoride tubes are used to collect, transport and process blood for testing plasma
or whole blood in the clinical laboratory.
Principle
The additive EDTA potassium salt which can chelate the calcium ion of
blood prevents the blood coagulation. Sodium fluoride controls the glycolysis.
Design
It is composed of plastic and or glass tube containing Sodium fluoride
and EDTA potassium salt as anticoagulant.
Sodium Fluoride
Specification
Specimen- Plasma
Additive- 20 unit/ml
Cap
color- Gray
Tube
size- 13 x 40mm
Draw
volume- 0.5ml, 1.0ml
Inversion- Invert the tube 6-8 times gently
Recommended
centrifuge- Centrifuge for 10 minute at 3500-4000RPM
Intended use
Sodium Fluoride tubes are used to collect, transport and process blood for testing plasma
or whole blood in the clinical laboratory.
Principle
The additive EDTA potassium salt which can chelate the calcium ion of
blood prevents the blood coagulation. Sodium fluoride controls the glycolysis.
Design
It is composed of plastic and or glass tube containing Sodium fluoride
and EDTA potassium salt as anticoagulant.
Sodium Citrate 3.8
Specification
Specimen- Plasma or Whole
Additive- 100 unit/ml
Cap
color- Black
Tube
size- 13 X 75 mm
Draw
volume-
0.5ml, 1.0ml
Inversion- Invert the tube 4-6 times gently
Recommended
centrifuge- Centrifuge for 10 minute at 4000RPM
Intended use
Sodium Citrate 3.2 % tubes are used to collect, transport and process blood for testing
plasma or whole blood in the clinical laboratory.
Principle
Coagulation tubes are filled with buffered tri — sodium citrate. The
mixing ratio is 1part citrate to 9 parts blood with advantages of high accurate blood
— to — additive ratio. It can provide an excellent condition for the blood coagulation
studies.
Design
It is composed of plastic tube containing Sodium Citrate as
anticoagulant.
Urine Container
Intended use
Urine collection container is intended to be used for the collection and transport of
human urine specimens.
Draw
volume
30ml ,50ml
Principle
It is just a plastic container with the cap. Does not contain any
antiseptic or additives in it.
Design
It is just aplastic container with the cap. Does not contain any
additives in it.
CELL FREE DNA
Specification
Specimen-Plasma
Additive- Chemical 200 unit/ml 6 Gel 1.2 unit/pm
6 K2 edta 140 unit/ml
Cap
color- Gray
Tube
size- 16 X 100 MM Glass tube
Draw
volume-10 ml
Inversion- Inversion 8-10 times after collection
Recommended
centrifuge- Centrifuge at 2000 ref for 10 min in 4 degree Celsius
centrifuge.
Spray- K2
Intended use
Plethora Cell-Free DNA Tubes enable noninvasive prenatal testing in clinical
laboratories.
Principle
These tubes capture and preserve cell-free DNA fragments for early
detection of fetal genetic abnormalities.
Design
Meticulously crafted from high-quality glass, the tubes offer
convenience and reliability in sample collection and transportation.